2022.01.27 02:36 jjj-Australia JW_Untoldtruth # 39 CULTOS Y POR DENTRO "SCIENTOLOGY Y ESCAPAR DE LOS TESTIGOS DE JEHOVÁ"

JW_Untoldtruth # 39 CULTOS Y POR DENTRO submitted by jjj-Australia to Extj [link] [comments]

2022.01.27 02:36 kaempferia Like the TOP OF THE CHRYSLER BUILDING

submitted by kaempferia to ToyotaPickup [link] [comments]

2022.01.27 02:36 X8Raptor 2 Days in and mine stopped working after 24 hours

2 Days in and mine stopped working after 24 hours submitted by X8Raptor to Starlink [link] [comments]

2022.01.27 02:36 mechmaster2275 Looking for something

I’m looking for a compilation video of Halo: Reach with “Raindrops keep falling on my head” playing in the background. It was posted on either this subreddit or gaming. It was pretty recent, but I can’t find it for the life of me. I would really appreciate it.
submitted by mechmaster2275 to halo [link] [comments]

2022.01.27 02:36 rose3sarah3 Searching for resurge deep sleep and high support formula reviews?

Searching for resurge deep sleep and high support formula reviews? submitted by rose3sarah3 to united__states [link] [comments]

2022.01.27 02:36 mike33cedarpk Principles Defined (Explanation Sought)

I've seen a lot of twists on what everyone thinks principles are. It's twisted so much that now I think I have my own views of what they mean.
This is what I got.
Principles - serve as a foundation for our belief, ideas, rules and laws governing our operations, moral guides, generally accepted set amongst all and used as logic and reasoning.
Please feel free to give examples, but basically they are rules and guideline for what we do, how we conduct.
submitted by mike33cedarpk to EnglishLearning [link] [comments]

2022.01.27 02:36 a-typical-username Poll: CS applicants (auto/nonauto & acceptance/no decision)

View Poll
submitted by a-typical-username to UTAustinAdmissions2 [link] [comments]

2022.01.27 02:36 GriffinFTW Bully Maguire vs. Angel Dust

Bully Maguire vs. Angel Dust submitted by GriffinFTW to raimimemes [link] [comments]

2022.01.27 02:36 StepReferal ⭐✨✨ Chime bank is giving $100 free with your first qualifying deposit✨✨⭐

submitted by StepReferal to making_money_online [link] [comments]

2022.01.27 02:36 gruia Dr. Robert Malone, viewed by so many as a hero for saying nobody should get the Pfizer and Moderna vaccines, is actually developing his OWN COVID VACCINE

Dr. Robert Malone, viewed by so many as a hero for saying nobody should get the Pfizer and Moderna vaccines, is actually developing his OWN COVID VACCINE submitted by gruia to kotakuinaction2 [link] [comments]

2022.01.27 02:36 White_Chocoalate Nothin' special here, just a regular cover of Persona 5.

Nothin' special here, just a regular cover of Persona 5. submitted by White_Chocoalate to personajerk [link] [comments]

2022.01.27 02:36 easily_rekt Lost it all but couldn’t walk away.

Lost it all but couldn’t walk away. submitted by easily_rekt to wallstreetbets [link] [comments]

2022.01.27 02:36 vulcanjedi2814 Kansas City's Cerner Corp. rebuffed another takeover effort before merger with Oracle

submitted by vulcanjedi2814 to cernercorporation [link] [comments]

2022.01.27 02:36 das_cthulu Did Canada make Christianity illegal?

submitted by das_cthulu to NoStupidQuestions [link] [comments]

2022.01.27 02:36 Cel3st14XD I feel like changing to the 2nd one ngl

submitted by Cel3st14XD to GachaClub [link] [comments]

2022.01.27 02:36 Mcslap13 Ram issues?

So in an attempt to figure out why I get kicked from almost any multi player sever mods or no mods (for the past year) I noticed ark is using 13.2 - 14 gigs or ram out of my 15.9 avaliable. I'm running 16 gigs of 3600mhz.
Is there a way to lower how much ram it uses but not have to run the ultra low ram mose that looks like crap?
Or should I just get more ram and go to 32gigs?
submitted by Mcslap13 to ARK [link] [comments]

2022.01.27 02:36 Timelord102 Plymouth Massachusetts shot with Dji mini se

submitted by Timelord102 to drone_photography [link] [comments]

2022.01.27 02:36 chloewilkinsin Still no tampons

I’ve been able to get to the second size of the intimate rose dialstor which is bigger than a tampon. But I just started my period and can’t even get a small, super light tampon in without cringing or being in pain. Any advice?
submitted by chloewilkinsin to vaginismus [link] [comments]

2022.01.27 02:36 The_Golden_Alchemist Gonna spend 30 hrs just exploring

Gonna spend 30 hrs just exploring submitted by The_Golden_Alchemist to memes [link] [comments]

2022.01.27 02:36 aspiringcopywrite Why are Asian Americans so easily flustered and deferential when speaking to white people?

This is just something I observed among my family and others in my Asian community. It's not universal but I very commonly see Asian Americans just flip a switch and be nicer or more deferential or more stilted when speaking to white people, even though their English is just as good as white people's. I've even seen Asian people poke fun at their own ethnicity in an effort to amuse when speaking to a majority-white group. I know a lot of people know exactly what I am talking about, but what are the psychological roots of this phenomenon?
submitted by aspiringcopywrite to TooAfraidToAsk [link] [comments]

2022.01.27 02:36 gilber33 Z-Axis too high at start of print - but completely fine for leveling.

Some background: I have been printing PETG, ABS, and PLA for a month or so without any issues up to now. I was only using petg when I started and never had problems with bed adhesion and was generally producing great prints. For the last couple weeks I have been messing with ABS and other than trying to get warping under control, everything was fine.
I switched back to PETG last weekend. I started a print on the smooth side of the bed and it didn't stick at all. Whatever. I switched the bed around, leveled it, and went again. Wouldn't stick. Replaced the nozzle thinking this was one was a little gunked up on the bottom, still nothing. I messed around with print temps, bed temps, etc. I re-adjusted the Z-Offset on the printer, leveled it a dozen times, and nothing. Tonight I'm looking at the nozzle closely after it ran through the leveling with the CR Touch and I noticed that it was sitting really high. I quickly slid three sheets of paper under it without much resistance. So my problem isn't bed adhesion, it's that the z-axis for some reason is sitting high when the print starts. As soon as I would cancel the print I'd home the z-axis and check the offset and it's totally fine. One sheet of paper. I'd run through the manual leveling and each corner would be good. I have great meshes, so this isn't a leveling issue either.
What would cause this? The first print I attempted in PETG after the switch was a filament spool roller from thingiverse.
Here is my start up g-code. It's the same one I've been using since installing the CR Touch.
; Ender 3 Custom Start G-code
M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature
M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature
M104 S160; start warming extruder to 160
G28 ; Home all axes
G29 ; Auto bed-level (BL-Touch)
G92 E0 ; Reset Extruder
M104 S{material_print_temperature_layer_0} ; Set Extruder temperature
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
M109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature
; G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
; End of custom start GCode
I will say that it does the two purge lines OK, although it takes about halfway through the first one for it to start sticking. And it does the skirt decent. As soon as it gets to the part there is no adhesion and I'm assuming that is because the part is quicker and shorter movements as opposed to the long sweeping movements of the purge lines and skirt that give the filament a chance to stick.
Is there something I could have bumped in the printer menus that could cause this? Any help would be appreciated!
submitted by gilber33 to ender3v2 [link] [comments]

2022.01.27 02:36 sgern HP OMEN 17 17-ck0020nr - Best Option?

I'm planning on buying a gaming laptop soon as my main computer, and I think I've found the one I want: the HP OMEN 17 17-ck0020nr. At a glance, it seems pretty much perfect, with great internals and a price much lower than other comparable laptops. However, I do have some questions about it and its features.

  1. From what I understand, the CPU and GPU are unlocked, the GPU is the good, high-performance version of the 3070 powered up to its maximum wattage (not too far off compared to its desktop counterpart and able to handle basically anything I throw at it in 1440p), and the display has the full standard color gamut as opposed to that cheap 72% or whatever nonsense. Is this correct?
  2. Is the screen either GSync or FreeSync? I couldn't find any solid info on this aspect, and having one of these would make refresh rate management for different games and shows much easier and help better tolerate any FPS dips (if I understand what they do correctly).
  3. How exactly do the MUX switch and Optimus work? I'll keep the laptop plugged in basically 24/7 while it's on, so I want to totally eliminate the iGPU - not even have it show up as an option for anything. Can I do that with this, or at least how close can I get?
  4. Is this laptop too good to be true? Low price isn't always a good thing, and last time I had an HP gaming laptop it slowly failed over the two years I used it. Are there any reliability issues here, or anything else I'd need to watch out for? Barring that, do I void any kind of warranty or protection plan I could get by upgrading the RAM and/or storage (512GB isn't a whole lot)?
  5. Amazon only has a few of these left in stock. Am I totally screwed in terms of getting one there if they run out before I make my decision, or will they restock in the near future?
submitted by sgern to GamingLaptops [link] [comments]

2022.01.27 02:36 salludabbang Mourni Roy and Suraj Nambiar Wedding❤️

Mourni Roy and Suraj Nambiar Wedding❤️ submitted by salludabbang to BollyBlindsNGossip [link] [comments]

2022.01.27 02:36 EyeOk3642 Flashbacks to the great friskies war of 77’

Flashbacks to the great friskies war of 77’ submitted by EyeOk3642 to cats [link] [comments]

2022.01.27 02:36 Spacecowboy421 Weed is definitely a gateway drug

Soon after I started smoking weed it got me interested in psychedelics then stimulants and now I’m into benzos and opioids. It might not be a gateway for everyone but it definitely was for me
submitted by Spacecowboy421 to teenagers [link] [comments]